Creative pebble v2 vs v1 THE MOST UP-TO-DATE USB-C CONNECTIVITY AND AUX-IN | An update from the Creative Pebble, the Pebble V2 is now future-proof and powered by USB-C, which is available on modern computers and other electronic devices. Because of the USB-C connection, the speaker can draw more power, resulting in greater music quality at higher volumes without introducing distortion. Simply connect your devices via the ubiquitous 3.5 mm AUX-in for music playback and the USB-C port for power, and you’re good to go. Creative Pebble is connected to two other people. One USB port for charging and one 3.5mm jack for connecting an audio source. However, Creative does not advocate or advise the use of a cable extender for them since it may result in poor audio output or audio signal interruption. For your information, the cable dimensions are as follows: – A USB Type A cable (about 1.2m in length) is attached for powering the speaker. – Approximately 1.2m of stereo line In a standard 3.5mm jack. – Approximately 1.1m of speaker-to-speaker cable connection (attached) Drivers and passive radiators | A custom-tuned far-field driver system with rear-facing passive radiators for great audio reproduction and increased bass reproduction.
Drivetrain components that are 45 degrees raised | for improved audio projection and an immersive personal listening experience
Interior design with a modern and trendy look | suitable for any modern house, business or workspace
Volume control is easily accessible | Front-facing controls are conveniently located for quick changes With a USB-C to USB-A converter, you may use Pebble V2 on your older PCs while still maintaining compatibility with Pebble V2.
The Pebble V2 has a built-in gain switch for amplified music, and it is up to two times more powerful than the original Pebble. When you connect the Pebble V2 to a 10W USB-C or USB-A port, you will hear amplified audio. High gain mode will be activated on the speakers, allowing for enhanced volume levels of up to 8W RMS total power and up to 16W peak output from the speakers.
DRIVERS AND PASSIVE RADIATORS WITH POWERFUL 2″ FULL-RANGE DRIVERS | Pebble V2’s updated custom-tuned far-field drivers and rear-facing passive radiators produce richer and louder audio, as well as better bass reproduction, providing the most immersive music experience possible.
PEBBLE V2 CONTAINS THE SAME 45° ELEVATED DRIVERS AS THE ORIGINAL CREATIVE PEBBLE, which are deliberately oriented to send sounds straight towards you for an immersive personal listening experience.
https://awreviews.com/the-pebble-v2-has-a-built-in-gain-switch-for-amplified-music/